I think it's more of matching decor. Most people I know who have the bellwoods don't get the crank cover.
04-18-2002 Over year old.
Doug Elite Veteran Location: Naples Florida....
If I read it correctly, the case cover increases the "primary" compression ratio thereby increasing the transfer flow rate. (Hard to imagine being able to put the back cover any closer to the crank pin or lessening the clearance from the piston skirt to the cover)
04-18-2002 Over year old.
ed vega Key Veteran Location: nyc, queens
it would be interesting if one plug was used for up to 60-70% throttle, and the other for the high end .. does it work like this ?
04-18-2002 Over year old.
Dave_D Key Veteran Location: Philippines
Basically, if you put a hot & cold plug in it, you shouldn't have any problems since basically, you've covered all the bases as they say in terms of plug choice.
04-19-2002 Over year old.
East Coast Scale Key Veteran Location: Taxachussetts
What we are starting to see now with the dual plug head is using the same plug in both spots seems to work best. Two Enya #4 or 5.
Joe
