Ted-swe
Heliman
Location: Sweden-Kungshamn
| I have some problem with my Gyro. When I swith my gyro to high rate mode so my rudder servo (Futaba S9203) start to act strange. It's ok to move the rudder slowly back and forth but when you try to move it quickly it start to sound loud just like if you try to move the servo and it's stuck BUT it's not stuck, you can still move it but it's not smooth anymore.. It looks like it can't determind where it should stay or where it should go.. I have a Futaba 9C transmitter and there is no rev-mix (if it helps to know), there is no trims are centered. The helicopter is a Fury Basic 60. The I placed the amp on the left rigth frame under the gyro. And the gyro is about 2.5cm from the rudder servo and maybe 1cm from the amp.
Another thing that I noticed is that when the servo get ****ed up my battery warner drop down REALLY much.. there is a scale from 1 to 6
and it can sometimes drop down one step on the green in just a few seconds... it's almost short curcuit..
Well I'm a newbe so I need some help here. I thought it would work with high rate on this servo. Isn't it a Digital High Speed servo made for rudder?
/ Ted |
