rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 598 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page342 viewsPOST REPLY
Model Rectifier Corp . Heli Wholesaler . 3D Heli Depot

.
.
Radio - Servo - Gyro - Gov - Batt > 9HZ WCII Trim levers
 
 
jmiceli11
Senior Heliman
Location: Girard, PA 15 min west of Erie, PA, USA

I just recieved my transmitter back from Futaba after they had to replace a faulty elevator POT. Now the trim levers for the throttle and the elevator are opposite of their respective sticks( ie the trim lever for the elevator is beside the throttle stick and vise versa). I'm pretty sure that a mistake was made but could a fellow 9ZH WC II owner check this out before I nail the service center to the wall.
Thanks
04-07-2002 Over year old.
 
 
Hotwings
Key Veteran
Location: Florida, Port Charlotte and West Palm Bch.

the default settings on your trannie are elev trim on left trim and throttle trim on right trim, go to function screen and put them where you want them , most of my friends us the trims as they come, see above so you can adjust elev with left hand while flying and throttle as needed with right hand, read your manual about trims and it will tell you the same, c-ya

Please cancel my clearance, I have the field in sight.
04-07-2002 Over year old.
 
 
metalman
Senior Heliman
Location: ada, okla.

9Z trim levers

The way you recieved it back is default. You can change the trims any way you want by opening FNC screen and moving them. Check your manuel, I'm pretty sure it describes how. Let me know if you have trouble, I'll try and help further.
04-07-2002 Over year old.
 
 
jmiceli11
Senior Heliman
Location: Girard, PA 15 min west of Erie, PA, USA

Thanks Guys

Thanks for the quick responses. It was driving me nuts, but with the 9ZH WCII I'm never sure what's right or wrong. The radio is very new.
04-07-2002 Over year old.
 
 
1 page342 viewsPOST REPLY
JR-Spektrum . Gyro Hobbies . E-flite

.
.
Radio - Servo - Gyro - Gov - Batt > 9HZ WCII Trim levers
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Tuesday, December 2 - 5:07 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie