lowandslow
Key Veteran
Location: Spring Hill, TN
| I have stick switching on. An on/off switch programmed and the Idle up switch on the Tx set for the speed switching.
The only thing I don't quite get is on a guys web page, he says
In the governor menu on the 8U set the %ages as follows: NORM 0, IDLE-1 50, and IDLE-2 100.
Then go into the speed selection screen on the GV-1 with the flight mode switch in normal. Set the speed to 1000. Go into idle up 1 and set it to 1500, now go into idle up 2 and set it to 2000. (Don’t worry about the actual speeds you want, you’ll set those from the transmitter)
Now use your TX to set the head speed you want in each mode. Go into the governor menu in the Advance menu and set the speed using the following formula:
If you want a head speed of 1200 (why would you!) set the %age to 20
1550 set 55
1910 set 91
1XX0 set XX
I don't see a reference to this anywhere in the manuals?? |
