rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 351 ONLINE 23 EVENTS SEARCH REGISTER  START HERE
 
1 page475 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
e-Minicopter Joker > linkages
 
 
tpiliero
Heliman
Location: Philadelphia, PA

I'm trying to set-up a new joker cx and having trouble with this. anybody willing to measure their linkages in milimeters. I would be very greatful.
11-07-2003 Over year old.
 
 
Flying Scot
Heliman
Location: Scotland

Linkages

I had a similar problem this week with the swashplate to Hillier Bridge rods on my Maxi Joker as the rods supplied were to long.
My rods assembled were 78mm long. I ended up cutting them and re-threading them to 66.5mm measured from the outside of the plastic ball ends.
The photographs on the disc supplied with the machine shows the rods being measured to 61mm
I would take care just in case these machines are supplied with different length main shafts.

Regards

Arthur
11-07-2003 Over year old.
HOMEPAGE  
 
 
East Coast Scale
Key Veteran
Location: Taxachussetts

The shaft in the Maxi is a little longer. I will measure my rods today to see what i have for you.
Joe
11-07-2003 Over year old.
 
 
East Coast Scale
Key Veteran
Location: Taxachussetts

The rods which go to the blade grip from the wash are 83.5mm, and the rods which go from the swash to the flybar control ring is 50.5mm. That is center to center of the ball links.
Joe
11-07-2003 Over year old.
 
 
1 page475 viewsPOST REPLY
Futaba-RC . A Main Hobbies . Boca Bearings

.
.
e-Minicopter Joker > linkages
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Sunday, October 12 - 8:38 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie