rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 503 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
1 page1103 viewsPOST REPLY
Futaba-RC . A Main Hobbies . Boca Bearings

.
.
e-Electric Batteries & Chargers > 3rd Triton Charger does not work properly!
 
 
hpilotrc
Veteran
Location: NY--->>Mooresville, NC USA 8/2005

I just received a new replacement Triton for one I sent back due to not be able to obtain the proper charge current on a Li-ion pack.

Unfortunately the new one basically does the same thing - in not being able to get to the 1.2A charge rate on a 2-cell 7.2V 1200mah pack. It was explained to me by Hobby Services that this may be normal for a 2-cell pack. Has anyone else experienced this???

However I decided to make sure the Triton works correctly when charging a Lead Acid battery (12V, 7.5AH) by first discharging it by 2750MAH at a voltage of 11.91 @2.6A. When I went to recharge it the current slowly ramped up to 3.0A as selected, and then started to ramp down.......but at only 1665MAH @2.8A (total time =41min) it just stopped with the "END" note meaning that charge was completed! It did not slowly ramp down to the normal 0.1A at 15.0V or so as my other Triton did. There is definitely something wrong with this charger.
This charger was a brand new one in a retail box.

I asked to talk to a knowledgeable person on the Triton -perhaps a designer or programmer and was told that the person who designed the Triton and was responsible for it is no longer there! I would hope that someone is looking into the complaints that people have and not just assuming that nothing is wrong with the Triton and just send out a "new" one.

My 2nd Triton is going back for another replacement in hopes of getting one that will finally work. I also hope that Great Planes hasn't given up on the Triton and is working on fixing the bugs or upgrading the firmware to make it more aggressive when charging Li-ion and Li-Po cells.

Update: Received my 3rd Triton from Hobby Services. This is another brand new unit and it too still does not charge my Pb Batteries properly.
I am waiting to hear from a Triton "Expert" about why my charger just shuts off with an "END" while still charging near the maximum current level. Instead of just sending me a new charger they should investigate what is causing this to happen and fix it!



Michael
09-23-2003 Over year old.
HOMEPAGE  
 
 
rockcrawler
Veteran
Location: Covington Wa

Same thing for me. I have a 3cell duralite for my 9z. My triton
also will not chrge this battery. Its a Lith -ion so same deal.
Please keep me informed of what happens.
Terry.
09-23-2003 Over year old.
 
 
JKos
Elite Veteran
Location: Town of California in the state of Maryland

You know, I'm pretty sure mine doesn't ramp down either when charging my TP 3S4P-7800 pack. I've happened to be watching it a few times when it stops and says its done and the current had not ramped down. Hmm...

- John

Protos -- Logo 14 -- Logo 10
09-23-2003 Over year old.
 
 
rockcrawler
Veteran
Location: Covington Wa

What do you think they would say if like 5 -10 were sent back at once.
Think they might fix the problem?
09-23-2003 Over year old.
 
 
d_wheel
Senior Heliman
Location: Deep in the heart of Texas.

Mine is an older model with the original firmware. It works fine. Be sure and mention that to them when you send yours back.

Later;

D.W.
09-23-2003 Over year old.
 
 
hpilotrc
Veteran
Location: NY--->>Mooresville, NC USA 8/2005

Triton problems continue...read orig post.

Now I have had three Tritons!

Read my original post for an update.

Michael
10-10-2003 Over year old.
HOMEPAGE  
 
 
1 page1103 viewsPOST REPLY
Modefo's RC Helicopters . XHELI.COM . Autography FlightPower

.
.
e-Electric Batteries & Chargers > 3rd Triton Charger does not work properly!
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, August 30 - 2:25 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie