Check out how i butcherd my xcell's front mounted servo tray, and re worked it to function from behind the main shaft. i plan on putting this in a scale project and wanted to be able to build a full cockpit. The way the servo tray is standard would not allow it .....So i moved it.
Notice that both push pull levers were reused to correct the geometry from the collective servo to the collective levers. a straight pushrod just would'nt work. all this was made from the original tray parts eccept for the brace on the left side.
pretty cool!
do you think the rearrangement have any effect on the CG? what kind of fuse are you thinking about putting it in? be sure to keep us updated
Looks like you may have a little interaction on the elevator servo. Nothing a mix can't correct though.
DaveDavison, Miniature Aircraft Field Rep. Spectra,Stratus,Furion, JR 12x 2,4
03-17-2002 Over year old.
Chainsaw Heliman Location: Orlando Fl.
It is getting a little tail heavy, but i plan on building a sclae cockpit in the fuse plus i'll be able to move the battery and other bits further forward once it's in the fuse.
