Super Phreek Veteran Location: Sunny Lancaster, California
| Can't beat a triton....
A 12vdc 10 amps should be ok, depending on your application. If you can get about 13 volts out of it, even nicer.
I run mine off a 22 amp supply running about 13.5 volts. Works pretty good.
If you are going to use a computer powersupply, be careful, there is a thread of someone cooking there triton with such a ps. I ran off one for a little whie, did not care for it( had to load the 5 volt side with a .68 ohm resistor which ran about 7 amps(36 watts). The temp of the resistor was about 150 to 170 degrees F) I personally would not recomend that.
I hope this helps a little
Derek |