Art-Tistic
Senior Heliman
Location: Somerset, NJ
| Well Holy S**T!!!
This little moster screams!!! The only problem is the tail has a slight wag and it's a real confidence buster. I'm running a GWS EDP-50 direct drive with a 3X2 prop, tons of authority, using a GWS 50 SC w/HSC HGL200 HH gyro. The TX is an Eclipse 7 with no revo mixing. I believe that is the correct way to run a HH gyro that doesn't give you the option to disable the HH feature to setup the revo mix and then enable it once the mix is set. The problem is you can hear the motor surge as it searches for "zero" (neutral) I'm hoping some of you "seperate experts" can give some suggestions so I can really give this bird a whirl. Then my next probelm will be choosing a paint scheme for the B-222 fuse. Thanks in advance for the help. I'll try to get a clip of the bird up soon as well as a detailed list of parts.
CP Flybarless HB.
Modified HB Chasis for laydown 120 servos
Astro 010 Brushless w/Phenox 10 controler
FMA 6 channel Micro RX (Channels 1-4, 7,&6) 7 is needed for the retracts.
Hitech HS-50 servos
Andy's 120 Alum SP (for hornet)
My rendition of Walt Ferrar's Flybarless Hornet Head
Walt's Weighted CF Blades (reccomended for flybarless)
GWS-50 Speed Control for tail
GWS IPS-50 Direct Drive Tail w/3X2 prop (not shown in gallery
CSM HGL-200 HH Gyro
3cell Etech 1200 LiPo's
This list is just to give you an idea on the "coin" I've spent to get this bird airborn. More to come!!!
Regards,
Anthony
PS don't try running the 3cell lipo's with an Orion Elite and a hummingboard. You'll "cook" the Orion. I found out the hard way testing the new tail setup on my FP HB. oh well what's another $120 for an astro 010? |
