i just orderd my first quick heli i have been flying raptors. i orderd the gearing to i can use a 70 or 90 size engine. i want as much power as i can get and i know that these helis weigh more than a raptor but i dont know if they can handle a 90 size engine. when i orderd it they said that the os70 would be great but not to much about the os90 or ys80. has any one out there put a big engine in these things if so you is the best setup for power and 3d preformance. also i bought the pro metal what dose an average wreck cost and how does i take it.what is a good servo to use on this ccpm set up how much torqe and sped dose it need. thanks
07-18-2003 Over year old.
pequeajim Veteran Location: New Holland, PA
The 60 is a well built machine, however, you will need to install the proper gearing to support the 90 if that is what you want to put in it.
Pinion gears for the ergo will work on the quick. The heli can handle it physically but you have to have at least a 8.5/1 gear ratio. Also the quick 90 should be out in a few months.
I don't know alot, but I know what works for me!......................Memiors of a Schleprock.
07-20-2003 Over year old.
invrtd Veteran Location: Central Florida
crash costQuick heli's parts are very inexpensive compared to all the other high end machines on the market. Shouldn't cost too much more than a raptor crash.
