RunRyder - Need help with 35HO controller...

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 611 ONLINE 42 EVENTS SEARCH REGISTER START HERE

1 page

448 views

POST REPLY

PowerHelis	.	JR-Spektrum	.	Gyro Hobbies
	.		.

e-Electric Motors & Controllers > Need help with 35HO controller...

Bill Ludwig
Veteran
Location: Tucson, AZ

I'm new to electrics, so please be patient....I'm unable to get the 'armed' beep from the 35HO controller.

I'm setting my Futaba transmitter stick to full low position, turning on the the motor battery and receiver via the UBEC. I get a single beep, two seconds later, three beeps, and that's all. I never get the single 'armed' beep. I have the throttle curve set to 0,20, 40, 60, 80, 80, 80 and have the controller plugged into the throttle channel of the rx.

Any suggestions would be appreciated!!

Thanks,

- Bill Ludwig

05-28-2003 Over year old.

steph280
Key Veteran
Location: Irvine, California

Try the following:

1. Throttle channel on Futaba needs to be reversed. Check to see if that's the case.

2. Increase your ATV to 140%.

3. Check to make sure you are getting a good voltage from the battery. The 35Ho has minimum of 16 cell count, which is around 19 volts.

Hope these helps. Good luck.

Stephen

05-29-2003 Over year old.

Bill Ludwig
Veteran
Location: Tucson, AZ

It Works Now!!!!!!!!!!!

Thanks, Stephen, for the suggestions - it was the reversed throttle channel......strange!

I appreciate your help,

- Bill

05-29-2003 Over year old.

1 page

448 views

POST REPLY

E-flite	.	Next D	.	Fast Lad Performance
	.		.

e-Electric Motors & Controllers > Need help with 35HO controller...

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic