rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 738 ONLINE 44 EVENTS SEARCH REGISTER  START HERE
 
1 page1007 viewsPOST REPLY
Modefo's RC Helicopters . XHELI.COM . Autography FlightPower

.
.
Engines Plugs Mufflers Fuel > What are your settings on a OS61sxwc???
 
 
T Koffler
Heliman
Location: Cayuga, NY

Hello again!
I'm wondering what other people have their needles set at. I talked to a few different people about it and they all said something different....

I'm looking for settings for 30% cp at lets say 75*F with a Hitori muffler...

Mine are: low= 2 turns out, mid=3 clicks out, high speed 1 3/4 out.

The problem with mine is that it goes lean when I start to decend(only for a second or three).

Just wondering....
10-18-2001 Over year old.
 
 
CCoker
Senior Heliman
Location: Atlanta,GA

low 1 1/2, mid 1, high 1 1/2 this is close to what im runing if you dont get more replies I'll get you a more persice seting.
10-18-2001 Over year old.
 
 
freestyle
Veteran
Location: Redmond WA USA

I'm using a muscle pipe... high and low are 1.5 turns out, mid is completely closed.

Are you running a governor? If so, try richening the low end to help with the descents. My YS+GV1 setup needed the idle rich to avoid overspeeding. I haven't run my OS with a governor, so this may not be directly applicable, but GV1 was definitely pulling the throttle WAY back during descents. Your low end already looks kinda rich, though...
10-19-2001 Over year old.
HOMEPAGE  
 
 
Eagle
Senior Heliman
Location: Australia

OS 61 SX WC with CP 30%

I was using coolpower fuel but have since changed.

My log book says the needles were:
low - 2 turns in from fully open
mid - 1 1/4 turn
high - 1 1/4 turn

Muffler was a Hatori 611

Hope this helps

10-19-2001 Over year old.
 
 
1 page1007 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
Engines Plugs Mufflers Fuel > What are your settings on a OS61sxwc???
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Monday, July 7 - 4:09 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie