rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 796 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page261 viewsPOST REPLY
Ron’s HeliProz South . Century Helicopter . MTA Hobbies

.
.
Thunder Tiger Raptors 30-90 - Imperio > Raptor 60 blades
 
 
JEraptor
Senior Heliman
Location: Kankakee IL

What size blades can you fit on a stock R60?
Can I fit my 680 mm blades on an R60?
Or will is there an interferance problem with the tail blades?

Also, the clutch seems to be slipping on the R60, have these had clutch problems?
It flys ok but it seems that I can cause the headspeed to decay without bogging the engine. It also seems to engage at a moderately high RPM.
02-18-2002 Over year old.
 
 
Heli-Driver
Elite Veteran
Location: Arlington, TX

blades

I have 680's on my R60 and they aren't a problem if your running stock sized tail rotor blades.

About the clutch, are you sure it's glued in? Did you glue it yourself? Some ARF's aren't glued. It could be just a bad fit, liners are cheap, change it and see. You don't want that clutch to grab late as it has to flex too much outward and can eventually break.



Raymond

Predator Gasser SE/231 X 2
Century Helicopters
02-18-2002 Over year old.
HOMEPAGE  
 
 
1 page261 viewsPOST REPLY
Model Rectifier Corp . Heli Wholesaler . 3D Heli Depot

.
.
Thunder Tiger Raptors 30-90 - Imperio > Raptor 60 blades
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, December 4 - 11:27 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie