witeout
New Heliman
Location: USA
| In setting up the atg with the g-view everything looks and works OK after setup. But the low end reads(w/throttle cut engaged)2052 and the high end reads 1111. Aren't the numbers backwards? The Low should have a low number and the High should have a high number. Looking at the manual.
throttle ch3
gov ch7 (blue lead) end pionts for both channels 100/100
norm (atg off,50%), idle 1(1850RPM), idle 2(1950RPM) all in normal mode.
I tried reversing ch7 and I still get the same result. I didn't change ch3 cause that would cause the throttle servo to move in the wrong direction. And I also tried to change +/- Limit(in gov. ch7) to + and - also with no change. So left at +Limit. Any ideas on how to correct this haven't flown yet cause not sue here. |
