rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 729 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page229 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
Radio - Servo - Gyro - Gov - Batt > Which is better PPM or 2.4
 
 
DS 8717
rrProfessor
Location: Here wishing i was somewhere else

Doesnt 2.4 just mask problems just like PCM that will manafest themselves later and cause a potentionaly dangerous situation.
09-15-2008 10:06 PM
 
 
ZAC ATTACK
Veteran
Location: Hamilton Ontario, CANADA

Like what????

MAAC#77677 Medicated daily for your protection
09-15-2008 10:15 PM
 
 
JKos
Elite Veteran
Location: City of California in the state of Maryland

The 2.4 GHz systems are much less susceptible to interference than a PCM or PPM system. Not only do our helicopters not generate noise in the 2.4 GHz band (unlike the MHz RC bands) but the vary nature of spread spectrum allows the system to truly ignore most noise sources.

Unlike a PCM system which can cover up an increasing noise level from the heli itself from, say, a bearing going bad until it's "too late", the 2.4 GHz system will never even "hear" that bearing.

The 2.4 GHz systems also protect you from Joe Schmo turning on his transmitter on your channel and taking out your PPM or PCM receiver.

So, I would say the short answer to the question in your title is, 2.4 GHz. And, the short answer to the question in the body of your post is, no.

- John

MSH Protos
09-15-2008 10:28 PM
 
 
mike lewis
Senior Heliman
Location: northeastern AZ

NO & N0

no race 2.4 wins again
09-17-2008 03:47 AM
 
 
1 page229 viewsPOST REPLY
Autography FlightPower . Advantage Hobby . Revolution Models

.
.
Radio - Servo - Gyro - Gov - Batt > Which is better PPM or 2.4
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Monday, December 1 - 5:33 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie