traderdave2
Veteran
Location: Covington, GA
| Morgan,
I am running a gv-1 on my 10x.
I use the gyro gain adjust, Code 44, to mix my gv-1.
1. I go into code 44 and set it to auto 100%.
2.Then I set the three gains on the radio at 0=100,1= 50, and 2=0.
3.After you have adjusted the gains, hit the page button and select what gain you want associated with each mode(n,1,2,3,4,5).
You will have to adjust your gv-1 to get the exact head speed you want. I just gave the numbers that work for me. As you adjust one number it affects the others. Play with it and you will see what I mean. I have mine set up of n=off, 1=1750, 2=1850.
This does not hurt my setup becuase I set the gyro gain by my travel adjust on the gear channel. I set it for the highest headspeed I run and just leave it alone.
Harlan |
