Wess94 Senior Heliman Location: College Park, Md
| DetailsI set everything up as per the raptortecnique website as my entire setup was identical to his...R30 ,Airtronics RD6000 super, OS 32,GY401/9253....the problem just started after making some adjustments..loosened the belt to approx. 1/4" play..I really think it may be the engine running rich.....anyway...revo mixing is off..no trim on the rudder..I do run HH in normal mode..radio set to 90%..gyro is set at DS on, delay 0, limit 140 or max
I am running rich because I was having a lean condition after a couple minutes of hover ( could also be that the motor was under to much load..ie..not enough throttle) Not exactly sure where the needles are at this point, pretty sure I`m a little over book setting on the low end, and probably a touch rich on the high end.Running coolpower 30%...
I have an experienced pilot coming to look it over tomorow, hopefully he can figure it out..
yes the noise got better by loosening the tail belt and I also lubed several bearings including the one way in this whole adjustment deal.
Hope this helps you help me..LOL
Wess |