rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 620 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page160 viewsPOST REPLY
E-flite . Next D . Fast Lad Performance

.
.
e-E-Flite Blade CP mCX CX 400-3D > Blade 400 3D Part number for tail bearings
 
 
Mighty Mouse
Heliman
Location: Picayune, MS

I am looking for the size or part number for the two tail bearings that sit in the tail case. The rotor shaft runs through them. The diagram is a bit hazy on these. Looks like it measures 3mmX6mmX2.5 maybe? Thanks.


Is it EFLH1115?
08-17-2008 12:40 AM
 
 
DougsRC
Elite Veteran
Location: MA

I believe they are 2x5x2.5 mm (EFLH1466) HeliDirect has them in stock for 3.99 for two.
08-17-2008 12:53 AM
 
 
Ozz58
Heliman
Location: Ft. Worth, TX USA

Funny I had the same problem today at the LHS, They found bearings from the CP that fit.
08-17-2008 01:02 AM
 
 
Mighty Mouse
Heliman
Location: Picayune, MS

I know the outside is 6mm and the thickness is 2.5mm. Not sure about the i.d. though. I guessing 3mm. no local hobby shop for 90 miles.
08-17-2008 01:09 AM
 
 
DougsRC
Elite Veteran
Location: MA

I'm pretty sure the diameter of the tailshaft is 3 mm. now I'm confused to which bearing it is
08-17-2008 01:13 AM
 
 
DougsRC
Elite Veteran
Location: MA

Quote 
They found bearings from the CP that would fit
The mainshaft on the CP is 3 mm so the tailshaft on the 400 must be 3 mm.
08-17-2008 01:18 AM
 
 
totSandman
Senior Heliman
Location: Still Unkown

The bearings are 3x6x2.5 ..

Part number EFLH1115

http://www.horizonhobby.com/Product...ProdID=EFLH1115


Or you can use the Align ones


Part number AGNH1155

http://www.horizonhobby.com/Product...ProdID=AGNH1155

Blade400 2221-8, DS285MG ,Spartan DS76,Jr3400G ,CC35 ESC ,CC10amp BEC/ T-Rex 500 lots of upgrades
08-17-2008 05:27 PM
 
 
1 page160 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
e-E-Flite Blade CP mCX CX 400-3D > Blade 400 3D Part number for tail bearings
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, November 20 - 4:00 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie