rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 617 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page113 viewsPOST REPLY
Ace Hobby . Esprit Model . Thunder Power RC

.
.
Radio - Servo - Gyro - Gov - Batt > Jr 9303 & Futaba 611
 
 
Arcus 4
Heliman
Location: Norwich, CT

I switched from a DX 7 to a 9303 transmitter and now my 611 does not respond to input from the gyro screen. The helicopter was built and set-up when I bought it so I did not have to 'learn' the gyro.
It does switch between normal and HH when I change the settings in the gyro menu, but the gain on the amp remains the same and my tail wags regardless of where I set it. Using an AR 7000 receiver with the gyro plugged into AUX 2.
Any help is appreciated.

Lance
08-12-2008 09:00 PM
 
 
DenisS
Key Veteran
Location: Essex, UK

Go into the 'monitor' screen and see which channel is changing when you move the switch on the Tx, usually 5 on the JR. Then make sure you have the gain lead plugged into that channel. In the system menu (when you switch on with the button pressed) there is a device screen where you can set the gyro gain output, see where that is set too aswell.
Denis

Crash 'n Lurn
08-13-2008 09:05 AM
 
 
1 page113 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
Radio - Servo - Gyro - Gov - Batt > Jr 9303 & Futaba 611
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 23 - 2:42 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie