Miguel
Heliman
Location: Quebec, Canada
| Hi
I rebuilt my tail after a crash. I have a GY401 and about 65% gain on my dx7. I set my servo horn to be at 90 degree with my boom and when it initialise, it is center on the tail shaft.
When i lift up, it always to turn to the left. The only way I have to correct this is to move the servo to the front of the heli. But if i do that, i'm almost at the end of the shaft and if I lift up like that, the heli act strange (sometimes it turn left and right with no input).
When it is centered on my tail shaft, i look at my heli and should have a bit of pitch to the right ?? (to conter the heli that naturally tend to the left). ?? I didn't seems to have that, it seems to be vertical and I thinks that's my problem. But here is my question ??? how to modify that ??? The only thing i can change it the position of the servo right ?? or maybe i'm missing something...
Help me please
I'm sorry for my poor english, this is not my native language.
Miguel
T-Rex 450 SE V2 / Blade CX2 / Spektrum DX7 / AR6200 |
