TJinGuy
Elite Veteran
Location: Socorro, NM - USA
| Step 1: Set swash type to 120* CCPM
Step 2: Set servos to normal and reverse so that they all move the same direction when you make throttle adjustments.
Step 3: Using the swash menu, set the elevation setting so that when you move the right stick up and down, the swash moves forward and back correctly. Change each to +50% or -50% as needed.
Step 4: Repeat #3 for aileron.
Step 5: Repeat #3 for pitch and also use this number to set the total pitch range. Higher = more pitch.
Step 6: Set normal throttle curve to 0-25-50-75-100 and pitch curve to 40-45-50-75-100 (or -2,0,10 degrees pitch at low, mid and full throttle).
The rest of the stuff is personal taste. If you need to speed up or slow down things, raise and lower the swash setting for ele and ail. You can also add expo or dual rates but I would start with the swash settings. Then just set the timer, strap the TG on the heli and go out and fly. Adjust as needed.
- Chris
Variety+spice+life+supporting_paper_towel_industry=
King2+Rex450+Protos+Concept30 |
