rbort
Elite Veteran
Location: Franklin, MA - U.S.A.
| Its possible its not built right on your endWhile I don't have my heli in front of me and I haven't "studied" your situation 100% in my head, its possible that you have something not built right. If you look through the starter holes from the bottom up, do you see key holes for the starter to enguage in or are some of them blocked by the motor red coil? If they are blocked then you probably installed the plate inbetween the motor and the bottom plate incorrectly.
Come to think of it, when I said counterclockwise in the video I meant when you're kneeling on top of the heli looking at it from the top down. If you inverted the heli and looked at the starter from the bottom, it would be clockwise.
To give more clearance for the starter, I install the 6 motor bolts from the bottom up with the nuts on the top not bottom -- this way the screw head gives the least profile from the bottom where it matters.
I'm willing to bet your assembly is not 100% correct as your starter locks in the other direction.
-=>Raja.
1005 Xcell Gas, BHH G26 3D Plus, Jewel Generator
Spectra-g, BHH G26 3D Plus, Jewel Generator |
