rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 745 ONLINE 28 EVENTS SEARCH REGISTER  START HERE
 
1 page120 viewsPOST REPLY
CanoMod . Futaba-RC . A Main Hobbies

.
.
e-Mikado Logo 400 500 600 > Logo 14 : screws to hold the motor to motor plate
 
 
JEY
Heliman
Location: Paris

I had taken off my motor from motor plate and did not use my logo for a long time. I can't remember wich screw lenght is good to attach the motor Tango 45 06 with motor plate adaptor 2499. On page 11 of the manual it says to use 2 screws M3 x 12. It seems 12 mm is not long enough to screw into the motor adaptor plate. Perhaps I used M3 x 14 instead. Can you confirm ?
07-09-2008 10:50 PM
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

depending onm which motor you will use will change the bolt you may have to use. Pretty simple, use what will work for the motor you wish to install, simply make sure you have 3-4 mm in the motor holding thread wise.

...Once upon a time there were Nitros, flybars and frequency pins...
07-11-2008 09:51 PM
 
 
kogibankole
Senior Heliman
Location: albuquerque

just make sure that the screws dont hit the fan right at the top of the motor. It should be easy to do. I used a flashlight to ensure that the screws went in, but didnt hit the fan.

if im not blade bogging youll find me pack puffing
07-11-2008 10:51 PM
 
 
1 page120 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
e-Mikado Logo 400 500 600 > Logo 14 : screws to hold the motor to motor plate
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Wednesday, October 8 - 2:19 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie