RunRyder - Hornet CP config

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 296 ONLINE 28 EVENTS SEARCH REGISTER START HERE

1 page

1289 views

POST REPLY

Modefo's RC Helicopters	.	XHELI.COM	.	Autography FlightPower
	.		.

e-MS Composit Hornet > Hornet CP config

yapjy
Key Veteran
Location: Singapore

Hi,
I'm getting a Hornet CP soon.
This is going to be my configuration:
1)Hornet CP with speed 300 motor
2)GWS 100 ESC
3)GWS 6ch micro rx
4)GY240
5)Hitec HS50 for tail and HS55 for cyclics
6)Etec 1200mah 2S cells

Anyone would like to share their configuration?
Any comments?

04-19-2003 Over year old.

joboo101
Heliman
Location: Kuwait (Originally from Macon, Georgia)

Hornet

I use 4 HS50's a Hacker B20-22s with a schulze 20HE and 3 cell Etec 1200 Li-Polys. Everything else is the same as your setup. If you haven't already purchased what you've listed I'd recommend going with all HS50 servos and a 3 cell battery pack if your speed control will handle the voltage.

Joe

Regards, Joe

04-20-2003 Over year old.

yapjy
Key Veteran
Location: Singapore

Well, I intend to keep the speed 300 for a while. Just want to fly mild aerobatics with it. I read that 2 Etec 1200mah will be sufficient for the speed 300.
I will get 3 Etec 1200mah if I go brushless.

04-20-2003 Over year old.

kshaw2154
Senior Heliman
Location: Atlanta, Ga. USA

CP Hornet

I'm currently putting together a CP Hornet using the MS 001 brushless motor and the MS 016 speed controller with GY 240 and HS 50 servos, Berg 6 channel Rx, the stock 7 cell Nimh battery pack, anybody got any experience with this setup? I'm new to electrics, normally burn nitro instead of electrons

Thanks,
Keith

04-22-2003 Over year old.

Hoverup
Elite Veteran
Location: Gulf Coast

Go to 8 cell NiMh's or 3 cell LiPoly packs for your CP or you will be disappointed with the lack of power if you can get the Hornet off the ground. 7 cell packs do an adequate job on an FP with the stock speed 300 brushed motor but won't let that BL motor sing like it could with more volts. I'd go with a three pack of E-tech 1200mah LiPoly cells. Great power and over 20 min duration when set up properly(gear lash, throttle and pitch curves, etc.)

Cheers - Boyd

AMA 80393
Major USAF
Retired

04-23-2003 Over year old.

dnts
Veteran
Location: Israel

Get a Berg Rx. You will never regret it

The Rx sits in such a close proximity to the engine that all the RMI/RFI crap coming from it really drives the Rx mad. I put Berg. Silky smooooth performance with no glitches (they can really ruin an otherwise great day).
My setup - FP at the moment (until I master it). CP sitting in the box waiting. HS55 for cyclic, stock motor (300) with metal pinion, the forementioned Berg and a GY240. GWS PICO BB for tail control. 8 cell NiMH and a KOKAM 1020 2x2 waiting for a connector job. Another HS55 patiently waiting for the CP work to be completed.

04-25-2003 Over year old.

1 page

1289 views

POST REPLY

Advantage Hobby	.	Revolution Models	.	CarbonXtreme
	.		.

e-MS Composit Hornet > Hornet CP config

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic