Will this charger be ok for the flightpower 6S batteries for the Trex for any other 6S machine?
06-23-2008 02:30 PM
S76 Mech Elite Veteran Location: Hatboro, Pa.
I use this charger for my 6S packs and it works fine all the way up to (1.5C), it doesn't have the power to charge @ (2C) if you should so desire. The built in balance feature is nice and works great. The other thing that I don't care for is the operating temperature of the charger. During even a normal charge cycle (1C / 2.6amps) the charger itself will get very hot sitting there on the bench. Just an FYI.
06-23-2008 02:34 PM
vigor10 Senior Heliman Location: Plano Texas
Thanks,the reason I thought about buying it is to eliminate having 2 chargers, I have a TP1010 but it doesnt charge ncad and nimh and my triton wont charge 6S batteries.
06-23-2008 02:43 PM
electricdurango Veteran Location: Sterling, VA
Vigor10.
Just buy the data cable and do a firmware upgrade for your 1010C. Its like 30 bucks or something. You will have PB,LIPO,A123,NICAD, NIMH. Plus can still charge to 10S lipo if you want.
450se v2
06-23-2008 09:36 PM
vigor10 Senior Heliman Location: Plano Texas
Thanks, I didnt know that.
06-23-2008 11:18 PM
electricdurango Veteran Location: Sterling, VA
I was actually looking at that 610 also. I heard it gets mega hot while charging.
