rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 756 ONLINE 28 EVENTS SEARCH REGISTER  START HERE
 
3 pages [ <<    <     1     ( 2 )     3     NEXT    >> ]1385 viewsPOST REPLY
Real Raptors . Mikado Modellhubschrauber . GrandRC

.
.
e-BEAM Beam E4 > Just finishing up my Beam
 
 
mstuck
Heliman
Location: Valencia, California-USA

Ya im running that setup too.
Crazy power with 10-12 min flights!!!!
06-28-2008 06:57 PM
 
 
jamesppp
Senior Heliman
Location: carrollton georgia usa

what 4S packs are you guys using?
06-28-2008 07:39 PM
 
 
mstuck
Heliman
Location: Valencia, California-USA

Im using TP prolites.
There a little more than 1 oz. heaver than standard 3s.
06-28-2008 08:02 PM
 
 
mstuck
Heliman
Location: Valencia, California-USA

http://www.runryder.com/helicopter/t430945p1/
06-28-2008 08:09 PM
 
 
centuryman
Veteran
Location: deerriver,mn usa

just flew ZAAAAGUY72's beam with a 3600 kv motor on 3s at 3200 hs and 14/14 pitch, it's a sweet machine,very stable yet resonsive,lots of pop,decent run times,If i was still into 450's i'd have one on the way.
06-28-2008 10:18 PM
 
 
jamesppp
Senior Heliman
Location: carrollton georgia usa

ZAAAGuy, do you have the Scorpion 8 w/ a 13t pinion.

How did you get the head setup with 14/14 and keep 0 pitch in the middle. I can't quite get 11/11. I want a little more up top but dont need any more negative pitch...since I can only fly right side up at tis point.

I did pretty good today. Got 7 flights early this morning between the Swift and the Beam. Good conditions.
Jimmy
06-28-2008 10:40 PM
 
 
centuryman
Veteran
Location: deerriver,mn usa

ZAAAGUY is actually useing my electrfly motor right now ,as his motor is in for warrenty and i whanted to fly it and so did he.as far as the pitch,it wasn't hard we just maxed out the travel,his first few flights was on 11 degrees or so and that sucked but 14/14 woke it up esecially at 3200 hs,she's apoppy little machine.I was so temped to bust some 3D ,but the weather was bad and it's not my machine ,plus the swash is still tight on the main shaft.besids za should be the first to atleast flip it, it is his bird after all.But the next time i get to fly it, she'll get put through her paces.
06-28-2008 10:47 PM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

It flew pretty well this morning eh Centuryman??!!

Once your past smelling something, you got it licked!!!
06-28-2008 11:46 PM
 
 
centuryman
Veteran
Location: deerriver,mn usa

especially considering it had my wimpy electra fly motor in it.I wish you would get that first flip done so i can bust some moves with it.I think i might have to reconsider another 450 if it 3d's as good as i think it will.
06-29-2008 12:05 AM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

That motor actually pulled really well, I was surprised. Howd you like the RJX, quite a lot of pop for a nitro, Eh!!!

Once your past smelling something, you got it licked!!!
06-29-2008 12:22 AM
 
 
centuryman
Veteran
Location: deerriver,mn usa

Yes i am one to admit when i've flown a sperior machine and your rjx is that machine.course it should be i tcost more then all three of my ravens

The vbar defenitly gives it alot more power,probably close to the power to weight of a 90 without the drag of the flybar.I've never seen a 50 nitro that could hold 14 degrees of pitch for more then a second or so, till today.

About the beam, it helps when you setup the radio correctly, cant beleive you've been flying on that setup, i can't beleive you didn't fry that esc, the scorpion esc's must be good to take that kind of abuse.
06-29-2008 12:31 AM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

I appreciate all your help today with the Beam and RJX, thanks. We'll have to head up to the funfly tomorrow.

Once your past smelling something, you got it licked!!!
06-29-2008 12:42 AM
 
 
centuryman
Veteran
Location: deerriver,mn usa

sounds good. I'm glad i could help,and i'm glad that your beama nd rjx are comeing around, now you can get some flying in , and start working on you earobatics and then your 3d.
06-29-2008 12:49 AM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

I was getting the hang of circuits till the last 3 crashes in a 2 week period and have been a little timid, I am feeling better again though!

Once your past smelling something, you got it licked!!!
06-29-2008 12:54 AM
 
 
centuryman
Veteran
Location: deerriver,mn usa

Glad to hear it. I whant to see some flips on that beam next time we fly.It's time to kick it down and learn 3d so we can do double 3d rutines.
06-29-2008 12:57 AM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

I am ready to start doing flips again!!!! Hovering is getting dull.

Once your past smelling something, you got it licked!!!
06-29-2008 12:59 AM
 
 
centuryman
Veteran
Location: deerriver,mn usa

Yeah especially for your spotter. Yaaaaawwwwwnnnnn.now that duct fan today, that scared me just watching it . manis that thing fast or what.we need a radar gun , i know that thing is way over a hundred.
06-29-2008 01:04 AM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

It was haulin ass!!! I was amazed that that Beam could hold a 14 Degree climbout, werent you?

Once your past smelling something, you got it licked!!!
06-29-2008 01:13 AM
 
 
centuryman
Veteran
Location: deerriver,mn usa

Yup . especially at 3200 hs with a (wimpy motor) that is what you called it last week before i adjusted your throttle and pitch curves today
06-29-2008 01:16 AM
 
 
jamesppp
Senior Heliman
Location: carrollton georgia usa

How did you set the throttle and pitch curves up???

Inquiring minds want to know
06-29-2008 01:23 AM
 
 
3 pages [ <<    <     1     ( 2 )     3     NEXT    >> ]1385 viewsPOST REPLY
CanoMod . Futaba-RC . A Main Hobbies

.
.
e-BEAM Beam E4 > Just finishing up my Beam
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Wednesday, October 8 - 2:06 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie