jjchoe
Heliman
Location: irvine, ca usa
| I had a quick question, i have read some of the post, and read the manual, but still had a question. If i used a BL main with the stock 3 in 1, and brushed tail motor. do i connect the wires that goes to the receiver from the 3 in 1 and the wires that goes to the receiver from the BL speed controller, minus one of the red wires for the (BEC)together (so "Y" connect the BL speed controller with the 3 in 1 receiver wires (so black with black, white with white, and just one red (do not "Y" the red wires (BEC))) Is this correct?
I have a BL system and just wanted to try it, but did not want to damage any of the electronics. |
I usually disconnect the "red" wire from the BL ESC plug.
