RunRyder - RAPTOR 90 Raptor 90 3D Washout arms

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 699 ONLINE 46 EVENTS SEARCH REGISTER START HERE

1 page

314 views

POST REPLY

HeliHobby	.	Ron’s HeliProz South	.	Century Helicopter
	.		.

Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 90 Raptor 90 3D Washout arms

Heligio
Senior Heliman
Location: Belgium

Hi guys,

Can someone tell me if the washout arms of the Raptor 90 3D differ in length or shape to the ones of the Raptor 90STD or SE?
Just mentioned that the part number is different.

Best regards,
Gio.

06-15-2008 08:44 PM

Ts8103
Senior Heliman
Location: Baltimore, Maryland

They should be interchangeable. I just measured mine and they arre similair in size.
Tone

I don't know alot, but I know what works for me!......................Memiors of a Schleprock.

06-16-2008 02:46 AM

Heligio
Senior Heliman
Location: Belgium

Hi Tone,

Thanks for your reply!

Regards,
Gio.

06-16-2008 04:38 PM

AMainMaker
Key Veteran
Location: Nappanee,IN

they are the same arms but in the washout kit for the 903d it comes with a pin and e clip where the SE just has a pressed in pin.
Jason

Thunder Tiger Rep
Wildcat Team Pilot
Kong Power Team Pilot
Sw!tchGlo
CY Enterprises

06-17-2008 08:47 PM

HOMEPAGE

leadlag
Senior Heliman
Location: London

Thats interesting AMainMaker.

On the washout on my 90 3D one of the pins, clips the ball when the arms are level and the other one is very close. I have resorted to adding a extra washer so the one that clips clears.

Thunder Tiger have added these new pins and clips to the existing arms without redesigning the mixer arms.

06-18-2008 12:48 AM

AMainMaker
Key Veteran
Location: Nappanee,IN

I am running mine with the clips to the outer edge away from the balls and have at least a mm or two or clearance.
Jason

Thunder Tiger Rep
Wildcat Team Pilot
Kong Power Team Pilot
Sw!tchGlo
CY Enterprises

06-18-2008 02:24 AM

HOMEPAGE

ste1981
Senior Heliman
Location: Voghera - Italy

If you want the best washout assembly for R90, you might consider to get the QUK one. Pins are secured with a grub screw into the arms, very good and safe method IMO

Take a look at my gallery to view this.

Stefano

06-19-2008 02:39 PM

S Bell
Senior Heliman
Location: Nova Scotia Canada

Leadlag,

Quote
On the washout on my 90 3D one of the pins, clips the ball when the arms are level and the other one is very close. I have resorted to adding a extra washer so the one that clips clears.

The 90 3D uses one clip per pin since the other end has a flat head on it. (Maybe you have the wrong pins and have clips at both ends?) I suggest you remove the pins and insert them in the other direction. If the pin is correct and you have end chuck with the flat head end hitting then the washout arm has something wrong or the pin is too long. The thin flat end of the pin will be at the end you are concerned with clearance.

Stephen

Raptors are everywhere

06-20-2008 10:52 PM

HOMEPAGE

1 page

314 views

POST REPLY

MTA Hobbies	.	Model Rectifier Corp	.	PowerHelis
	.		.

Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 90 Raptor 90 3D Washout arms

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic