RunRyder - Blade CP+ Erratic 4-in-1

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 322 ONLINE 42 EVENTS SEARCH REGISTER START HERE

1 page

122 views

POST REPLY

Fast Lad Performance	.	Ace Hobby	.	Esprit Model
	.		.

e-E-Flite Blade CP CX 400-3D > Blade CP++ Erratic 4-in-1

rrevw
Heliman
Location: St. Charles, MO USA

I've been flying my CP for some time and tried to take it out today. When I plug the battery in the servos jitter then one of several things happens:

The 4-in-1 flashes 3 reds, then LED off - nothing, controls are all dead
The 4-in-1 flashes 3 reds, then alternates red and green, controls are all dead
The 4-in-1 flashes 3 reds, then solid green, (no flashing green), controls are all dead

I've been flying this on a Futaba 9Z for quite some time and never had a problem. I tried the original transmitter and got the same results so I know its not the Tx.

It worked just fine the last time I had it out. Any ideas or similar experiences.

My CP is nearly stock with a 3S lipo, 8T pinion motor and just switched from wood to graphite blades (couple times flying with the composite blades). Main and tail are fused and fuses are fine.

thanks all,

06-11-2008 12:40 AM

tutelar-rc
Key Veteran
Location: Nobleton, Ontario - Canada

Check that the crystal is properly seated in the receiver (and it is the same frequency as the Tx). Easiest way is to remove it and replace it...

--> Alternating red/green means you do not have a positive RF link.
--> Solid red means the throttle (and trim) is not in the lowest possible position.
--> Blinking green means still initializing.
--> no LED means ?

Solid green is what you are looking for.

06-11-2008 02:57 AM

1 page

122 views

POST REPLY

Thunder Power RC	.	Real Raptors	.	Mikado Modellhubschrauber
	.		.

e-E-Flite Blade CP CX 400-3D > Blade CP++ Erratic 4-in-1

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic