rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 594 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page611 viewsPOST REPLY
Thunder Power RC . Mikado Modellhubschrauber . GrandRC

.
.
RJX Hobby Hurrican 50 - Xtreme 50 > RotorTech 610 main blade with 95mm tail blade question
 
 
edball flies!
Heliman
Location: Singapore

Hi guys,

I just want to know if this combination will risk any chance of intermeshing at the rear. Thanks
06-03-2008 06:57 AM
 
 
Foxden
Key Veteran
Location: Port Charlotte, FL. USA

No you will be fine

Clyde Fox
Port Charlotte FL
RJX of USA Field Rep
Team Rotorworkz
Morgan Fuel Rep
06-03-2008 07:24 AM
HOMEPAGE  
 
 
ez2bgman
Elite Veteran
Location: N'awlins, LA

I am running the RT 610mm 3D blades with RJX 95mm tail blades without any problems.

Gary
RJX of USA
Magnum Fuels
SwitchGlo
>Hot Girlz in da gallery<
06-03-2008 07:29 AM
HOMEPAGE  
 
 
edball flies!
Heliman
Location: Singapore

Oh cool, many thanks

I was running Radix 600SB and really really couldn't handle all that floatiness in them but granted I gained a lot of cyclic speed with them. Radix SB with Stubz are really very fast on the new Futaba BLS352, a little too fast for me lol.

Anyhow, I am hoping to get a bit more bite with the RT blades and less floatiness.
06-03-2008 11:41 AM
 
 
pitch black
Senior Heliman
Location: Singapore

Sell the SBs to me then!
Problem solved.

Thanx!

Slope Soaring not a Crime
06-03-2008 12:09 PM
 
 
Foxden
Key Veteran
Location: Port Charlotte, FL. USA

You certainly will, Steven noticed a big difference when he started to fly the RT610's

Clyde Fox
Port Charlotte FL
RJX of USA Field Rep
Team Rotorworkz
Morgan Fuel Rep
06-03-2008 12:43 PM
HOMEPAGE  
 
 
edball flies!
Heliman
Location: Singapore

Ah cool, that is the diff I hope I am looking for.


Pitch Black, too late lol! I sold it to Victor.
06-03-2008 01:11 PM
 
 
aviation
Senior Heliman
Location: Quebec Canada

Rotorteck Blades

I use nothing but rotorteck blades 610 and they are the finest blades that I can put on my helicopter with 95 tail blades and rotorteck paddles. This is a wining combination

aviation
06-10-2008 02:46 PM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

My buddy has fly's Radix, Rt's, Mavrikk's, and Gohbee's, I only have flown the Radix 600's although I own a set of Gohbee and RT's for my Xtreme 50. I watched my buddy fly all the blades and he came to the conclusion that the Radix Blades were a good blend of collective pop and cyclic control but still somewhat tame, The RT's are great for FF flight but have less "pop", the Mavrikk G5 Pro's have the most "pop", but are less smooth, and the Gohbee's are a good all around blade.
06-12-2008 07:47 PM
 
 
edball flies!
Heliman
Location: Singapore

Well, I tried both RT610 and RadixSB and I prefer the former more. The RadixSB imo is a bit hard to judge its pitch envelope. Where I live, we tend to describe it as being floaty, so I had to constantly adapt my collective range depending on what the heli was doing at the time to do what I want it to do. This led me to fly a somewhat pretty ridiculous S curve on my pitch lol. One thing though, SB is really cyclic fast, I had to bring down my cyclic quite a fair bit to make it easier to fly, the first roll was the scariest, it rolled like a plane, barely had time to feed in negative (dun think it is even needed lol)

The RT610 is much more predictable, cyclic not as fast as SB but still plenty and it bogs less somewhat. I personally thought the pop on this blade is better too and more consistent, doing side tic toc with it is always reassured with a nice "fart" sound in between.
06-13-2008 10:51 AM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

I just started flying my Flybarless Xtreme with 95mm CY tail blades and RT610's and have had no problems. Love the RT's though, very smooth blades.

Fly, Fly, and Fly some more!!!
06-17-2008 12:15 PM
 
 
centuryman
Veteran
Location: deerriver,mn usa

Now if i could just find a blade that had the pop of the maverick g5pro620 widechords and the good fff of the rt610's it would be the perfect blade.
06-25-2008 04:55 AM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

I wonder if the VBlade 620's are any good? Im gonna have to order a pair and see.

Fly, Fly, and Fly some more!!!
06-25-2008 04:25 PM
 
 
buzzsaw
Key Veteran
Location: Southeast Louisiana

Quote 
RotorTech 610 main blade with 95mm tail blade question

Damn good combo,I got to try the Rototechs this past weekend and I am running the 95mm RJX on the tail and it is SWEET!Soon as I finish off my 600's I most likley will switch over.Go for it bud,you will be pleased.


Buzz

Sponsored by Me!
Team Tom Tom! lol!
06-25-2008 07:25 PM
HOMEPAGE  
 
 
centuryman
Veteran
Location: deerriver,mn usa

zaguy i wish you would ordera pairso i can try them to
06-26-2008 03:57 AM
 
 
Zaaaguy72
Veteran
Location: Grand Rapids, MN

You know Ill let you try them Centuryman!!

Fly, Fly, and Fly some more!!!
06-26-2008 12:41 PM
 
 
1 page611 viewsPOST REPLY
CanoMod . Futaba-RC . A Main Hobbies

.
.
RJX Hobby Hurrican 50 - Xtreme 50 > RotorTech 610 main blade with 95mm tail blade question
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, December 5 - 5:05 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie