RunRyder - New X50 8mm heads

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 723 ONLINE 21 EVENTS SEARCH REGISTER START HERE

1 page

803 views

POST REPLY

Ace Hobby	.	Esprit Model	.	Thunder Power RC
	.		.

RJX Hobby Hurrican 50 - Xtreme 50 > New X50 8mm heads

RjX of USA
Senior Heliman
Location: IL

These are IN STOCK ready for shipping. RjX has come through again. 8mm heads..... as requested by some of our pilots are here. (Limited quanities) comes complete with all bearings, thrust bearings heavier centerhub, mixing arms, blade grips, ect.
They will be posted on our store in the next day or so. Please watch for them there.

Rusty Howard rjxofusa@myway.com

05-27-2008 06:06 AM

rsalazar
Key Veteran
Location: Florida, USA

Very nice

05-27-2008 01:30 PM

AirMail
New Heliman
Location: Earth

Are they made for the 3mm flybar?

05-27-2008 04:05 PM

red_z06
Elite Veteran
Location: Dumont, NJ

The bearing hole is for 4mm but 3mm flybar kit comes with 3mm id bearings to replace 4mm id bearing on the 8mm head.

www.justinchi.com

05-27-2008 04:56 PM

HOMEPAGE

RjX of USA
Senior Heliman
Location: IL

8mm head

These are In Stock and ready for shipping.

Rusty Howard rjxofusa@myway.com

06-02-2008 05:43 AM

red_z06
Elite Veteran
Location: Dumont, NJ

After mounting the 8mm rotor head, pitch angle have changed drastically. I'm going to assume the spindle center to Jesus bolt hole vertical dimension has been reduced which caused positive pitch setting.

The long link was pretty maxed out already so only 3 additional turn closing was possible. The short link (flybar to pitch arm) was turned in 6 turns. This still did not bring the neutral to zero so 3 cyclic links were closed 3 turns each.

Hope this helps those converting to 8mm head.

BTW, 3mm flybar and TT green paddles made this heli feel even lighter and nimble.

www.justinchi.com

06-10-2008 04:35 AM

HOMEPAGE

1 page

803 views

POST REPLY

Mikado Modellhubschrauber	.	GrandRC	.	CanoMod
	.		.

RJX Hobby Hurrican 50 - Xtreme 50 > New X50 8mm heads

PRINT TOPIC

Advertisers

Subscribe to This Topic