Markus87
Senior Heliman
Location: Melbourne, AU
| hey all
i just installed a Scorpion 2221-8 V2 in my mini titan, my only problem is that i can here the motor pulsing. At first i thought it might have been caused by vibration as i could see my tail fin buzzing, however after balancing everything and probably getting the smoothest heli i've owned, the motor still pulses. Its in a consistant 1 second rythem. I was running everything stock before with no problems, the only change i made was the motor, carbon tail boom and metal tail. The weird thing is that it an intermittent problem, some times it wont pulse, other times it will.
Its not the battery packs as they've each probably had about 50-60 cycles on them and were fine before i installed the motor. and i hope its not the esc. I'm thinking i might re-install the stock motor to check and see if its the motor thats no good.
Mini titan
Stock ESC 40A
2 - Flight power 2170mah 25C
Scorpion HK 2221-8 V2 13T pinion
"Takeoff is optional, landing is not" |
I re-did the set up of my ESC and i also changed the route of my wiring within the frame... and tried one or two other little things.
