rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 422 ONLINE 46 EVENTS SEARCH REGISTER  START HERE
 
1 page202 viewsPOST REPLY
GrandRC . CanoMod . Futaba-RC

.
.
e-Electric General Discussion > Axe cp Servo Problems and Bell Hiller Upgrade
 
 
GADAJA
Heliman
Location: Indpls;IN Marion

Tried installing Bell Hiller on Axe Cp, during set-up the back two servos would raise while the front servo would lower when incresing the collective (throttle)with the idle up on as the instructions state. Tried two different sets of servos original and Hi-tec 55s same results.Servos (all 3) raise and lower together with the cyclic. Switches on x-mitter ok and set in correct position (tried both ways). According to Heli-max all 3 servos should move together on both sticks. Tech support has been no help. Last reply: send it back for repair something wrong. As several other posts have noted I also have put far too much money in this Heli. Don't waste money on the Bell Hiller upgrade, the Bell Hiller arms have a large amount of slop at the pivot point mahing precise control impossible and the so called detailed set-up instructions are anything but detailed. Does anybody have any info on the servo problems ?
05-15-2008 05:58 PM
 
 
GADAJA
Heliman
Location: Indpls;IN Marion

Found problem with servos and corrected, trimmed out heli and flew, 1st fight great, 2nd flight screw holding ball to mixing arm came out(arm came preassembled mounted to grip w/balls installed but manufacturer didn't loctite them in place)big crash. Screw and bushing not available from heli-max yet (told approx in a month will be in stock) 1.5mm x 5 mm coarse thread. Tech support sending new arm . Learned my lesson trust no preassembled parts disassemble and loctite all new piecesfor peace of mind.
05-20-2008 07:09 AM
 
 
emag remrofni
Key Veteran
Location: Los Angeles California

I think thats a sign from the heli gods. TIME TO BUY A TREX

Check out my gallery
**Modefo's Heli's**
**Lightning Power Batteries**
05-21-2008 01:02 AM
HOMEPAGE  
 
 
Brovic777
Elite Veteran
Location: Los Angeles, CA

The Beam E4 is waaaaaaaaaaay better than a Trex 450. I've had both!!!!!

Killer Beam E4 450
Check out my HD Gallery
05-21-2008 11:14 PM
HOMEPAGE  
 
 
1 page202 viewsPOST REPLY
A Main Hobbies . Boca Bearings . Modefo's RC Helicopters

.
.
e-Electric General Discussion > Axe cp Servo Problems and Bell Hiller Upgrade
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, August 30 - 6:45 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie