Can someone tell me why my pitch is not the same.I got +12 and - 10. I have set my head as per the instructions on the cd but no luck.
05-11-2008 04:04 AM
Foxden Key Veteran Location: Port Charlotte, FL. USA
drummerMake sure that the rear servo swash assembly arm that the linkage connects to can be seen in the hole in the frame when you transmitter is at midstick, this will put the rear of your swash at the correct height to allow even pitch.
Check
STEP 6-7 LINKAGE CONNECTION in the manual and you will see the reference to the frame hole at 90 degrees.
Let me know if you are still having problems getting it even
Clyde Fox Port Charlotte FL RJX of USA Field Rep Team Rotorworkz Morgan Fuel Rep
Hi Foxden. Yes at half stick it is centred in the hole. The swash is level at half stick with 0 deg pitch. At full colective i get +12 and full nag its about 9,5 its driveing me to drink I don't know what more to look at....
05-11-2008 06:59 AM
I3DM rrProfessor Location: Israel
drummer, could you post a few pics of your head and bell mixers in 0 pitch ?
Team pilot for Radix, Helidirect, Logictech, ThunderPower, Fromeco, Gaui www.liorzahavi.com
Foxden Key Veteran Location: Port Charlotte, FL. USA
Another thing to try is to adjust rod "C" swash to mixing arm on grip and rod "A" mixing arm to grip so that the mixing arm is parrellel to the grip, this is the setup that we use and currently have 12.5 on both top and bottom.
Clyde Fox Port Charlotte FL RJX of USA Field Rep Team Rotorworkz Morgan Fuel Rep
Am going to remove all my links from the swash up the head and make sure all are right, If its still messed up after that i will send a picture at half stick... Thanks for your help
05-11-2008 03:00 PM
drummer5140 Heliman Location: Vancouver, canada
Well i spent all day on the head still no mater what i do i get un even pitch top and botom never had this kind of problem with all my Trex's i have built. At 0 and mid stik all arms are level and 90deg I give up
05-12-2008 12:52 AM
drummer5140 Heliman Location: Vancouver, canada
Fixed
05-12-2008 02:09 AM
Delamar Senior Heliman Location: adelaide, australia
how?????
05-12-2008 03:23 AM
Foxden Key Veteran Location: Port Charlotte, FL. USA
drummer,
What did you find?
Clyde Fox Port Charlotte FL RJX of USA Field Rep Team Rotorworkz Morgan Fuel Rep
Played around with link A till it was leval with the blade holders and link C to keep 0 pitch at half stick..In the end i got about 10.5 pitch range. Went into my radio and adjusted for 12 degs. I hope i did it right not used to this head played around with to many Trex's
05-12-2008 04:22 AM
Foxden Key Veteran Location: Port Charlotte, FL. USA
Yup,
Sounds like you got it. For tracking just make adjustments to rod "C" you souldn't have to play with rod "A" once you get the pitch set.
Clyde Fox Port Charlotte FL RJX of USA Field Rep Team Rotorworkz Morgan Fuel Rep
I don't know what more to look at....
