BalsaBob
Heliman
Location: Massachusetts
| Wondering which is the better (or correct) way to set up the throttle. One method I read said to set the servo arm slightly prior to 90 degrees - while the throttle arm on the engine is set to idle. I think this method would then cause the servo arm to be past 90 degrees when the arm on the carb makes the carb 50 % open. Another method said to have the servo arm set (at 90 degrees) while the carb is exactly
50 % open. I am not sure if there is a big difference between the two methods or not. Also ....... should the heli be set up to hover at 50 % stick movement, or 70 -75 % stick movement. I think I have read a few different methods here as well. (I will be doing basic aerobatics and scale flying, no 3D). Thanks. Bob |
