Cameron
Veteran
Location: Jacksonville, Florida
| Dood
| Quote |
| Going to the 7100's just for shaving weight or what?
Built in regulator?
the 7100 doesn't offer 2048 resolution, as far as I know, so that would be the trade off.
I read that you were planning on doing that on your website/blog
|
According to the manual it does support 2048 resolution.
http://www.horizonhobby.com/ProdInf...7100-Manual.pdf
Specifications
AR7100/ AR7100R
Voltage input - 6.0 to 10.0 volts/ 5 to 7 cell NiMH or 2-cell LiPo
Minimum receiver operational voltage - 3.5 volts
Minimum regulator operational voltage - 5.5 volts
Output voltage - Rudder, Aux 2, Throttle 2, Gear 2 = 5.2 volts/
all other channels unregulated (for high voltage
compatible servos only)
Max regulated channel current - 2 amp continuous
Resolution - 2048
Dimensions LxWxH - 47.3x40.2x14.2mm/ 1.86x.1.58x .56 in
Weight - 1.1 oz / 32.5 g
Switch - Soft Switch (Switch port can also be used with charge
adaptors (included))
Connector type - EC3 |
