bobthehobo9
Senior Heliman
Location: 813 T-Town... aka Tampa, Florida
| I have a new BC6 and a Thunder Power 6S 5000mAh lipo. When I try to charge the battery in balance mode, I get an error reading: "Battery Vol Err Cell Connect". The manual says that it means that there is a bad connection at the individual connector and to check the connector and cables carefully. I have the Bantam balancing board and harness to use with Thunder Power lipos, and I THINK I have it set up correctly.
I plugged the balancing connectors (both the 6 pin and the 4 pin) from the Lipo into the supplied Bantam TP board in the two furthest right connectors see: http://www.bantam.co.kr/image/Accessory/TP_board.jpg for details
Also, as per the manual I plugged the red and black main wires coming from the lipo into the charger as well.
Any ideas? |
