rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 576 ONLINE 72 EVENTS SEARCH REGISTER  START HERE
 
1 page126 viewsPOST REPLY
Modefo's RC Helicopters . RCHover . ZoomsHobbies

.
.
e-BEAM Beam E4 > tight tail
 
 
Justin911
Senior Heliman
Location: San Diego, CA - USA

still building my beam, and the tail is really tight... seems like the tail pulley shaft isn't the right size or it needs to be smoothed out some how. what do you guys recommend?

also my tail pitch slider came pre-assembled from the factory, and it seems to be tight on the tail shaft also. what do you think I should do guys?

thanks

Beam Team
DHW
Beam E4
T-Rex 500CF
05-02-2008 11:19 AM
HOMEPAGE  
 
 
shooter75
Senior Heliman
Location: Woodland Hills, Ca

I had the same problem with my Beam. What I did was I took some Mother's Aluminum Rim and Mag Polish and polished the shaft to a chrome finish. Once the shaft is polished just add some oil to the shaft and you should be good to go!

Eric
05-02-2008 05:08 PM
 
 
StrangeRanger
Veteran
Location: VT

Yup, tail shafts and main masts can always use a little polishing and lubing. Very high grit sand paper and them some metal polish like Flitz works wonders.
j
05-02-2008 05:47 PM
 
 
Justin911
Senior Heliman
Location: San Diego, CA - USA

Alright, thanks guys.... I'll give that a shot. Appreciate it!

Beam Team
DHW
Beam E4
T-Rex 500CF
05-02-2008 07:19 PM
HOMEPAGE  
 
 
1 page126 viewsPOST REPLY
Autography FlightPower . HeliHobby . HeliProz

.
.
e-BEAM Beam E4 > tight tail
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, May 17 - 3:03 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie