doorman
Elite Veteran
Location: E.Berne, NY
| I am needing an ESC that has a very soft start for a scale project and would like to hear some recommendations.... it needs to be in the 40 to 80 amp range....
I am using a CC60 now and if I run the t-curve lower then 64% I am getting a "pulsing" almost cut out on the motor which is causing the tail to kick... and if I go higher then the head speed is higher then I want....I am going to get a smaller pinion and hope this will cure the problem... but info on other ESC's would be appreciated...
Thanks, Stan
If there is a cure for this, please don't tell me about it!!! |
