BladeRex Heliman Location: Temecula, Ca
| I have a Scorpion 1600kv motor on back order and I'll be running it w/ Revco 15/68 gearing. This motor has a really low amp draw and is 1450w just shy of my Gaui 1100kv 1500w motor that I'm running on Revco 25/68 gearing. W/ the lower gearing my Hurricane should have more power and draw less current. I'll give an update on what improvements I get over all when ever my motor comes in. Scorpion also has a 1400kv motor that you could get away w/ running a Gaui 60t spur gear, but if you want run a kv any higher you'll need to get the Revco spur gear, it will also make it easy to run lower Kv motors also since you can get high tooth count pinions and w/ it's smaller pitch the gear's size is about right between the Gaui 48t & 60t spurs.
Axe CP pro, Blade 400, Trex 450 SE V2, Hurricane 550 |