spencer737
Senior Heliman
Location: Calgary, AB - Canada
| My links were way off from the factory so I first installed the servos and sub-trimmed them level at half stick with a linear norm pitch curve. I used wood blocks to set the swash at 7mm off the frame and then set the links to the ball, then I adjusted the links from the cage to the wash-out until the washout is level (both links have to be the same length) and then adjusted the pitch links so I had 0 pitch. all while having the pitch stick center and having a linear pitch curve. once this is done then put in the settings. Here are mine
my throttle curves are:
Norm- linear
ST1- 90 across
ST2- 100 across
Pitch Curve:
Norm- 30,40,50,7,100
ST1- Linear
ST2- Linear
Hold- Linear
-Spencer Drossos
BF Carbon Rep www.bfcarbon.com |
