rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 610 ONLINE 42 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]726 viewsPOST REPLY
Fast Lad Performance . Ace Hobby . Esprit Model

.
.
e-Mikado Logo 400 500 600 > Thrust bearings Logo 500 same ID
 
 
hobbyboy
Senior Heliman
Location: Puyallup,WA

I am just assembling my 500 Vbar and I noticed the thrust bearings are the same ID on the head. I could see a mistake with one set but both? Both sets indicate .244 ( all 4 pieces) Anybody else see this?
02-06-2008 02:17 AM
 
 
cptsnoopy
Senior Heliman
Location: Phoenix, AZ USA

I bought a Logo10 a while back that had one thrust bearing with the same smaller ID for both halves and the other thrust bearing had one larger and one smaller ID like it should. The incorrect one was replaced free of charge.
02-06-2008 02:47 AM
 
 
hobbyboy
Senior Heliman
Location: Puyallup,WA

Interesting, even Mikado makes mistakes. I have had a few PM's telling me the same thing has happened to them. Ok, no big deal. Just wish somebody in the Seattle area carried parts. Now it is a 10 day wait......
02-06-2008 05:53 AM
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

As much as I hate to tell you, "if need be" the t-rex 600 thrusts are same and will work 100%. Back when I had a 600 rex I actually used the Logo 10 :ie same as 500 Logo, thrust bearings in the 600 head.

So if you are in a pinch and can get those, they will work just fine as well.

...Once upon a time there were Nitros, flybars and frequency pins...
02-09-2008 12:30 AM
 
 
hobbyboy
Senior Heliman
Location: Puyallup,WA

You know I thought about that and then I thought no way. I have a untouched full trex kit and an extra set of thrust bearings too! My replacement set should be in the mail box tommorow, but I can finish tonight.

Thanks for the heads up!! Bob
02-09-2008 03:36 AM
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

Good to hear man, enjoy your weekend. Only use the thrusts of course exactly like the manual shows, do not use the rex spacer rings etc...

...Once upon a time there were Nitros, flybars and frequency pins...
02-09-2008 04:29 AM
 
 
pcskyhi
Senior Heliman
Location: Houston, TX

I just checked my logo 500 3D head and I have 2 large IDs on one side. I ordered the Trex 600 ones because they are half the price of mikado's. Thanks for this thread else I never would have thought to recheck.

pcskyhi - live and learn
02-13-2008 06:40 PM
 
 
dialtone
Senior Heliman
Location: Ontario- Canada

thrust bearings

I also ended up with incorrect id bearings.
Emailed Inde at Mikado and the correct parts are on their way.
Exceptional customer service at Mikado in Germany.
02-15-2008 03:05 PM
 
 
Tday
Key Veteran
Location: Needham, MA

This is all a little crazy...all 4 of mine are large diameter on 500#2. They were correctly paired on my first one.

I'm not sure I'd agree that it's great service to ship out replacements quickly since the mistake seems to be pretty common on this kit. Great service is shipping out the correct ones reliably and on the rare occasion there is a mistake, then shipping out the right ones.

First heli I've ever owned where the halves are mis-matched.

2 + 2 = 5 for extremely large values of 2.
05-06-2008 01:26 AM
HOMEPAGE  
 
 
norsman
Veteran
Location: paradise PA

Hobbyboy,parts are only 3 days away fxaeromodels.com
05-06-2008 02:08 PM
 
 
jjh23
Senior Heliman
Location: great britain

ok maybe a silly question to some, but why is the ID different on each 2 of the washers for the bearings
05-06-2008 05:59 PM
 
 
Tday
Key Veteran
Location: Needham, MA

That's a great question...stopped everyone in their tracks. My "impression" is that the smaller id makes things rigid...and so it's on the outside so the grip can only rotate, not "move". Not sure why the other can be a little bigger. Perhaps it allows the orings to do their dampening better so there's a little more play needed at mainshaft side of grip. Tom

2 + 2 = 5 for extremely large values of 2.
05-08-2008 03:06 AM
HOMEPAGE  
 
 
jjh23
Senior Heliman
Location: great britain

could be right there
05-09-2008 10:38 PM
 
 
Tday
Key Veteran
Location: Needham, MA

OK, I contacted Mikado-USA to get the correct, small ID thrust bearing race. Here's the email I sent and the reply. Not very helpful, do you think? Tom


---me to them---
I recently purchased my second Logo 500 (great machine!) and have an issue with the thrust bearings.

One of the races in each thrust bearing is supposed to have a smaller inner diameter which fits tightly on the spindle and one a slightly larger ID. Both races on both thrust bearings are the large ID races...so the head is not as tight on this kit as my first.

Would you send me replacement thrust bearing races with the smaller ID?

---Kyle Bergstrom, Aero-Model to me---
Please send these back to us and if we find something wrong we can send replacements. We have run into this problem before and 1 of the washers is very, very small difference.

----me to them----
Is there any way you can send 2 of the correct id races? I fly this model, though it's not as responsive as the other with the correct races. I’m happy to replace them and then send back the defective ones.

---Kyle to me---
We will need to see the thrust bearings before we can replace them.

2 + 2 = 5 for extremely large values of 2.
06-09-2008 07:26 PM
HOMEPAGE  
 
 
laughingstill
Key Veteran
Location: Gainesville, Fl, USA

If it was Aero-Model you called, you are not ususally going to get great service. IMHO they do not have a "service" oriented mindset.....Ron

3DMP-E, Logo 6003D, Logo103D Carbon and Trex 450se Flyin Firefighter
06-09-2008 08:06 PM
 
 
Tday
Key Veteran
Location: Needham, MA

I guess not...that was pretty lame, it seemed to me. Where should I call? They're the US distributor for these things. Isn't that SOP for kit problems? Tom

2 + 2 = 5 for extremely large values of 2.
06-09-2008 08:27 PM
HOMEPAGE  
 
 
CRAZYKEV
Veteran
Location: Cincinnati,Oh - U.S.A.

That does suck that they act like that! It's a very cheap part and not a motor or ESC or something of large value.

I'd send this to Mikado also.
06-09-2008 09:27 PM
 
 
Tday
Key Veteran
Location: Needham, MA

OK, here's his next response:

To replace anything weather it is a screw or a whole helicopter I must see the part before replacing. If any retail store will they send you a replacement without seeing the old one, they will be out of business soon.
I do not know of many businesses that have this kind of return policy. If this can be proven to be successful please let me know and we will try to change our policy to something that works better.
I can honestly say I have sent out very few thrust bearings with this problem. We are the USA distributor so all defects we would be aware of. If these people who claim to have this similar problem would send them back we would have an idea of what kind of problem we are dealing with. Being that I have received 0 thrust assemblies back I can not say we have a problem.
If you would like you can order the parts and we can send a check for the thrust bearings once we receive them back.

2 + 2 = 5 for extremely large values of 2.
06-09-2008 10:13 PM
HOMEPAGE  
 
 
helicraze
Veteran
Location: Victoria - Australia

You know what saves everyones time? A photo for small items like this.
06-09-2008 10:57 PM
 
 
Tday
Key Veteran
Location: Needham, MA

Good idea.

2 + 2 = 5 for extremely large values of 2.
06-09-2008 11:19 PM
HOMEPAGE  
 
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]726 viewsPOST REPLY
Thunder Power RC . Real Raptors . Mikado Modellhubschrauber

.
.
e-Mikado Logo 400 500 600 > Thrust bearings Logo 500 same ID
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Sunday, September 7 - 12:34 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie