RunRyder - On the C5

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 708 ONLINE 42 EVENTS SEARCH REGISTER START HERE

1 page

637 views

POST REPLY

CanoMod	.	A Main Hobbies	.	Boca Bearings
	.		.

Kyosho Caliber 30 & 60 - Concept - Nexus > On the C5

Madskyllz
Heliman
Location: central Ct USA

how many have used the phillips screws that are used to assemble the side frames? For me I remove all of them and use 3ml cap screws and nuts makes for one very rigid frame, also for the skids just cut some old fly bars to length of the skids insert in the bottom groove and epoxe in place now thats even stronger than regular alum tube skids ask me how i know.

02-06-2008 02:06 AM

dkshema
rrProfessor
Location: Cedar Rapids, IA

I only replaced the four screws that clamp the tail boom in place. The rest are fine as is.

The skids are also surprisingly tough as is. I was skeptical about those one-piece skids when they first appeared, but over time, I've discovered they work well as is.

-----

* Making the World a Better Place -- One Helicopter at a time! *

Dave

02-06-2008 03:57 AM

heli-cuzz
Veteran
Location: Pittston, Pa. USA

My first C-5 kit. I went to put the TP screws in to clamp the boom. I can't believe they would call for those in the assembly.
Needless to say, I did the same as Dave. The frame screws are just fine as they are.
I also replaced the bellcrank screws with a longer hex screw just enough to come through the inside of the frame.

As for the skids, they are tough as nails and slide nicely on the grass and asphalt.

At the end of this vid you can see my auto-slide.

Life Rotors On!!!

02-06-2008 01:32 PM

Helijost
Senior Heliman
Location: Pevely, MO - USA

I have only broken one set of skids. Trust me, it deserved to be broken. The machine is tuff. I haven't replaced my phillips in the tail yet... but I do plan on using some from my EVO 50 (same size).

600N, EVO 50, Caliber 5, Beam 450, and comming soon TREX 9000 :)

02-06-2008 03:12 PM

HOMEPAGE

JFERA22
Heliman
Location: MONTEREY,CA

helicuzz nice flying sounds like you got that motor dailed in good. Sounds good,that I bet you love that rev limiter too.keep up the good work brian talk to you later. jfera22

VOOOLAAAREEE~~~ way up in the sky!!

04-21-2008 05:11 AM

1 page

637 views

POST REPLY

Modefo's RC Helicopters	.	XHELI.COM	.	Autography FlightPower
	.		.

Kyosho Caliber 30 & 60 - Concept - Nexus > On the C5

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic