rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 324 ONLINE 19 EVENTS SEARCH REGISTER  START HERE
 
1 page172 viewsPOST REPLY
Mikado Modellhubschrauber . GrandRC . CanoMod

.
.
e-Gaui Hurricane 200 & 550 - EP100 > Hurricane 200 What is normal setting for align/telebee type gyro with dx7
 
 
robl45
Key Veteran
Location: Deerfield Beach, FL

I am using a telebee gyro right now and I get go higher than 45% on the dx7 without wag, getting ready to try my 401 and 3153 servo but wondering if other people are getting much higher numbers on these same type of gyros.
01-01-2008 10:03 PM
 
 
chopperben1
Heliman
Location: Ontario, Canada

I was running a telebee gyro at 37% (with a futaba 6ex transmitter). I then switched to a 401 gyro with the 3153 servo and this works VERY well.

The only problem I had with the Telebee is that I could not get it to centre properly and stop moving at centre. One day I would get it centered and get the gyro to stop adjusting on its own, and then two flights later it would be all off again and wandering. Very frsutrating. The 401 doesn't have any of those issues (although it is a lot heavier and more expensive)!

Did you have the same problem with the Telebee?
01-02-2008 02:05 PM
 
 
robl45
Key Veteran
Location: Deerfield Beach, FL

yea, it wonders a bit, I had to trim it a bit. I have a 401 I will drop on my 200 and see how it works, I think the telebee is just crap for anything besides hovering.
01-02-2008 02:31 PM
 
 
1 page172 viewsPOST REPLY
Futaba-RC . A Main Hobbies . Boca Bearings

.
.
e-Gaui Hurricane 200 & 550 - EP100 > Hurricane 200 What is normal setting for align/telebee type gyro with dx7
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, November 20 - 10:27 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie