rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 558 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
1 page361 viewsPOST REPLY
A Main Hobbies . Boca Bearings . Modefo's RC Helicopters

.
.
e-Electric General Discussion > How to Change Futaba/ JR Jumpers
 
 
Peter G
Senior Heliman
Location: Runcorn, Cheshire, UK

When I move cyclic stick forward, the tail starts to spin, followed by the main rotor, then all hell breaks loose.
I have checked all connections, and they seem OK.
I am using a Futaba TX with a Single conversion Futaba Receiver. I suspect the jumper needs changing, but I can, find it. Were is it?
or should i change the crystal for a Ikarus one.
This is a Piccoboard PRO.
Please Help
03-09-2003 Over year old.
HOMEPAGE  
 
 
spooky007
Senior Heliman
Location: Bakersfield, Ca

The jumper is below the crystal mount. Cut around the heat shrink and change position. There's 3 pins for the picoboard. The top and middle are for futaba and the middle and botton are for Jr. Also, sounds like your conections are backwards. If the board takes an input, your jumper is in the correct position. Your connections are wrong.

Al
03-10-2003 Over year old.
 
 
1 page361 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
e-Electric General Discussion > How to Change Futaba/ JR Jumpers
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, August 30 - 3:29 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie