rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 577 ONLINE 29 EVENTS SEARCH REGISTER  START HERE
 
7 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ]7556 viewsPOST REPLY
HeliHobby . Ron’s HeliProz South . Century Helicopter

.
.
Scale Model RC Helicopters > Flybarless 700mm 10S4P Jet Ranger OH-58A Build Post (HeliCommand Sys)
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al

i use a calibrated tool to determine height, width and stuff like that, mi eyeballs i really do so i cannot claim too much accuracy but for the most part it works. course i have easy access to most of what i model too.

drive a rotary, fly a rotorcraft
01-12-2008 04:36 PM
HOMEPAGE  
 
 
HS10
Senior Heliman
Location: Elk River, MN

Hi Copter Doctor

Here is my 1st attempt... Used brake line and TIG welded v braze... Since it is galvanized a fume hood is required...

Turned out pretty close... I used the calibarated "eyeball" you suggested and referenced the Bell diagrams from "BarracudaHockey"...

This helicopter had a set of skids that are different from all reference photos they have must less "bow" in them... I also did the 10 degree back angle on the vertical supoorts to be accurate...



Need to clean-up the welds, trim the forward angle (make them long to accomidate the welding process), fill the holes, and paint...

[phot]http://www.runryder.com/helicopter/gallery/28012/PDRM0052a.jpg[/photo]

Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
01-14-2008 05:44 PM
 
 
BarracudaHockey
rrMaster
Location: Orange Park FL

Pretty darn good!


AMA 77227
http://www.jaxrc.com
01-14-2008 07:00 PM
 
 
Rodan
Senior Heliman
Location: Prescott Valley, AZ

Looks good!

I like the 'ballast'!
01-14-2008 07:07 PM
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al

angle cut the toes on that there bad boy and you willbe in great shape. other than that, i give it my seal of approval.

drive a rotary, fly a rotorcraft
01-14-2008 10:28 PM
HOMEPAGE  
 
 
HS10
Senior Heliman
Location: Elk River, MN

Update

This is the interior frame for the attachment of the landing skids to the fusalage and pod structure. Ready to trim the toes...

Suprised by how light these skids are...





Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
01-18-2008 01:29 AM
 
 
BarracudaHockey
rrMaster
Location: Orange Park FL

Nicely done!


AMA 77227
http://www.jaxrc.com
01-18-2008 03:54 PM
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al

yes, very nice looking set of gear.

drive a rotary, fly a rotorcraft
01-18-2008 07:11 PM
HOMEPAGE  
 
 
HS10
Senior Heliman
Location: Elk River, MN

Update...

Treating the seams (fun winter project)... Currently minus -4F, the other day was minus -15F... Too cold to fly...



Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
01-21-2008 02:34 AM
 
 
HS10
Senior Heliman
Location: Elk River, MN

Update

- Treated seams on aft section and painted inside and outside...

- Fitting Logo24 Mechanics into fuselage



Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
01-27-2008 01:23 AM
 
 
HS10
Senior Heliman
Location: Elk River, MN

Hi Folks Update

Put together the scale navigation light system....

Strobe Top - Flashing (Custom Programmed)
Strobe Bottom - Flashing Custom Programmed)
White Tail - Steady
Red on horizontal stabilizer - Steady
Green on horizontal stabilizer - Steady
Landing light (Luxeon 1 Watt, 50 Lumen)
Recycled CAT-5 wire

PIC Controller 4 outputs w/16 dial positions



Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
02-16-2008 03:35 AM
 
 
FBoss
Veteran
Location: Cincinnati, Ohio, USA

Hey this is a good scale build thread, Keep it up!

The good ole times are now ,000132
03-03-2008 08:13 PM
 
 
FBoss
Veteran
Location: Cincinnati, Ohio, USA

So If you dont have a tig welder, what the best method to join the landing gear?

The good ole times are now ,000132
03-03-2008 08:14 PM
 
 
HS10
Senior Heliman
Location: Elk River, MN

Hi Folks

Here is a video of just the strobes...



I will post a video with the landing light... This is so bright that it is difficult to look at directly... The wife said the tail light and landing light is irritating and annoying...

Hi FBoss

You can "braze" instead of TIG welding, but my brazing is really bad... The guy the did the welding (30 mins) thought it was a fun project and I had to force money into his hand...

Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
03-04-2008 04:23 AM
 
 
HS10
Senior Heliman
Location: Elk River, MN

Update

I have read several post about the "helicommand rigid" system to convert to a flybarless rotor head...

At $75 an ounce I made the plunge and ordered one from Esprit Models...

I am very impressed with Esprit Models delivery turnaround, fast...




Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
03-11-2008 11:32 PM
 
 
K2-tokyo
Senior Heliman
Location: Tokyo, JAPAN

HI HS10

I recommend that the sensitivity of Helicommand should be
zero until the height becomes larger than 80 cm~100cm.
Because, if not zero at the lift off, the helicopter
will slide unwillingly to the direction of tail rotor power
(like a fixed pitch helicopter).
So, I recommend a 2-position or 3-position switch for the
sensitivity. Here is a page of my friend's micro 4-blade
heli with Helicommand rigid (but usage as a Helicommand A):

http://www.rcgroups.com/forums/showthread.php?t=567794
03-13-2008 04:08 AM
HOMEPAGE  
 
 
HS10
Senior Heliman
Location: Elk River, MN

Hi K2-tokyo

Thanks for the advice... I was trying to decide between using a 3 position switch or a slide...

It looks like the 3 position switch is better to ensure zero gain on takeoff...

Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
03-13-2008 04:24 AM
 
 
BarracudaHockey
rrMaster
Location: Orange Park FL

Quote 
So If you dont have a tig welder, what the best method to join the landing gear?

A torch with MAPP gas and silver solder is what I use, though a welder would be handy!


AMA 77227
http://www.jaxrc.com
03-13-2008 02:59 PM
 
 
HS10
Senior Heliman
Location: Elk River, MN

Hi Folks... UPDATE

Here is my mounting solution for the Helicommand in my Scale OH-58A... The bracket is designed to minimize vibration and does not touch the fiberglass fuselage... The bracket is adjustable to ensure that the CCD imager is centered over the aperture for a good view of the ground...

??? Experienced Heicommand Owners, do you see any issues ???









Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
03-15-2008 10:22 PM
 
 
HS10
Senior Heliman
Location: Elk River, MN

Video

Update

Here is the 1st initial HeliCommand test video...



Logo 14/24 (Agusta 109A-MKII) (MH-6 Little Bird) (OH-58A) Navy - Retired
03-16-2008 12:25 AM
 
 
7 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ]7556 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . 3D Heli Depot

.
.
Scale Model RC Helicopters > Flybarless 700mm 10S4P Jet Ranger OH-58A Build Post (HeliCommand Sys)
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, October 11 - 8:14 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie