RunRyder - The Binford 3000 starter

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 632 ONLINE 24 EVENTS SEARCH REGISTER START HERE

3 pages [ << < 1 2 ( 3 ) > >> ]

24238 views

POST REPLY

Revolution Models	.	CarbonXtreme	.	Midland Helicopters
	.		.

Tools and Field Equipment > The Binford 3000 starter rrTV-Photo

hootowl
Elite Veteran
Location: Garnet Valley, Pa.

Thanks Mark.

I got it figure out. I love this site!

Only CHANGE you'll get is what's left in your pocket.

10-07-2005 Over year old.

HOMEPAGE

said
Heliman
Location: Cape Town

if you look carefully you can see that the dry bearing has a type of retainer not sure whta its called but anyway you do get a ball bearing with an inner diameter to fit the starter shaft bit not an outer diameter to fit the casing so i made a sleeve to fit the outer diameter of the bearing and inner diameter of casing and it works fine

11-06-2005 Over year old.

hootowl
Elite Veteran
Location: Garnet Valley, Pa.

I ordered three sets of the DLR 1000 Tamiya connectors from Ricks and all three are crossed (red plugs into black). Am I missing something here? Or is this a problem?

Only CHANGE you'll get is what's left in your pocket.

11-10-2005 Over year old.

HOMEPAGE

hootowl
Elite Veteran
Location: Garnet Valley, Pa.

Answered my own question.

You can relocate the inserts in theTamiya connectors as some of the more experienced might already know.

I found that a long ball link has the perfect inner dia to use as a tool. Simply push it over the probe which squeezes in the little retainer tabs and pull the probe out the other side.

The funny part here is I put them red to red and black to black on my starter. This made my starter run the wrong direction. I ended up putting them back where they originally were.

Only CHANGE you'll get is what's left in your pocket.

11-10-2005 Over year old.

HOMEPAGE

schoenju
Senior Heliman
Location: Springfield, oregon USA

trickle charge

Couldnt you just use one plug and trickle charge both batteries overnight with your run of the mill peak charger? If you could what settings would you set your charger to if you were charging it wired parallel like this without having to separate the batteries.

Justin Schoenberg
~High Speed Low Drag~
Blade CP Pro(garbage)
Hawk Pro
T-WRAX 600n

02-04-2007 Over year old.

HOMEPAGE

3 pages [ << < 1 2 ( 3 ) > >> ]

24238 views

POST REPLY

HeliProz	.	ZoomsHobbies	.	HeliHobby
	.		.

Tools and Field Equipment > The Binford 3000 starter rrTV-Photo

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic