RunRyder - Help w/CSM Set Up

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 527 ONLINE 45 EVENTS SEARCH REGISTER START HERE

1 page

313 views

POST REPLY

Ace Hobby	.	Esprit Model	.	Thunder Power RC
	.		.

Flybarless Rotor Head Systems > Help w/CSM Set Up

stanc
Veteran
Location: Conroe, TX

Can someone tell me why the elevator servo moves with right or left cyclic? I have put all the setting back to the settings posted on the CSM site and everything works fine except the elevator servo moves with left or right.

Thanks for any help.

Stanc

Stan
2 x Ion X2
eStartus
eAvro90
Performance Plus Lipo Packs

10-30-2007 01:58 AM

tean
Senior Heliman
Location: Gloucestershire,UK

If you've got any value in the Cycloc's phase correction or interaction correcters the elevator servo will move slightly with aileron input. Any other cause would have to be in the TX.

Logo14 Vbar, Logo500 CSM flybarless, Trex 600 CSM flybarless, 3DMP, Logo10, Lipoly, Mini T, .......

10-31-2007 02:37 PM

stanc
Veteran
Location: Conroe, TX

I'll check and see if there is a value there. What would be in the TX. I'm using a DX7, the swash type is 1 Servo, no sub trims and no trims on the sticks. End points for Elev, Ail and Pitch are at 150. There are no mixes set up, so I don't have any idea how the TX has anything to do with the elevator movement when the aileron is moved.

Thanks,
Stanc

Stan
2 x Ion X2
eStartus
eAvro90
Performance Plus Lipo Packs

10-31-2007 03:25 PM

tean
Senior Heliman
Location: Gloucestershire,UK

How much is the elevator moving? Is it lots, like a channel assigment problem, or just a little, like an interaction issue? If it's the latter, you could try plugging the servos directly into the receiver to see if the problem originates in the TX or the CSM boxes.

Logo14 Vbar, Logo500 CSM flybarless, Trex 600 CSM flybarless, 3DMP, Logo10, Lipoly, Mini T, .......

11-01-2007 12:16 AM

stanc
Veteran
Location: Conroe, TX

Its a lot of travel. I'm just about to start looking at now, I'll let you know if I can find the problem.

Stanc

Stan
2 x Ion X2
eStartus
eAvro90
Performance Plus Lipo Packs

11-01-2007 03:38 AM

RockDoc
Senior Heliman
Location: Middlesbrough, England

Have you got each of the servo's directions setup correctly in the Cycloc? I set mine up as the settings posted on the CSM site and found that I needed to reverse a couple...
Good luck with it as i'm setting mine up at the moment and finding it pretty complicated!

Darren.

Sponsored by Barclaycard!

www.clevelandheli.co.uk

11-01-2007 08:35 AM

HOMEPAGE

stanc
Veteran
Location: Conroe, TX

Ya you can't use all the setting exactly like Colin has the example, like the servo direct.

Stan
2 x Ion X2
eStartus
eAvro90
Performance Plus Lipo Packs

11-01-2007 11:40 AM

1 page

313 views

POST REPLY

Real Raptors	.	Mikado Modellhubschrauber	.	GrandRC
	.		.

Flybarless Rotor Head Systems > Help w/CSM Set Up

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic