gorn
Elite Veteran
Location: Western Australia
| If you have the 450, at the front of the tailboom, with a mild amount of pressure (one finger is enough generally) push the belt inward.
If you can push it past half way across, its too loose.
Loosen the boom bolts and pull the boom backward a smidge, test again etc etc.
The 500 is a bit harder due to the belt being splayed a lot further out to go around the much larger belt pulley.
Same deal with pressure, push it in, and if you can push it further in than 4mm its too loose, adjustment is the same way as the 450.
If you bling it, they will come :D |
