rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 791 ONLINE 21 EVENTS SEARCH REGISTER  START HERE
 
1 page97 viewsPOST REPLY
Next D . Fast Lad Performance . Ace Hobby

.
.
Align T-REX 600N 700N > elevator servo jumps up when switched into idle.
 
 
npsk8ter
Senior Heliman
Location: Joliet, Illinois USA

I run the new jr8717 servos and a jr 8103 radio. When programmed i had to put -60 in the swash mix for the pitch since it was backwards and for some reason when i switch from normal to idle or to t-hold the elevator jumps up a tiny bit and now the swash isnt level! Ive never seen this before and it doesnt do this on my raptor 30 or my 600E. I went threw the whole radio for the cause and now mixes are active and im stumped! I know it cant fly right! Someone had this happen yet?
08-11-2007 Over year old.
 
 
Nightstalker
Elite Veteran
Location: UK (BEDFORDSHIRE)

Most radios require you to trim the heli out in each mode, so if you have her trimmed out perfect in normal mode then go into idle up and shes no longer in trim, then you will need to keep her in idle up and trim her in that mode or copy the settings into each mode (not all radios can do this) as the only difference is the throttle curve
08-11-2007 Over year old.
 
 
npsk8ter
Senior Heliman
Location: Joliet, Illinois USA

thanks a bunch and i guess we learn something new every day! Ive had this radio over 2 years and never knew the trim was seperate between all flight modes. I notice that was the problem watching my main screen when i changed between the 2! I never use trims and thats how i noticed! Thanks again tho!
08-11-2007 Over year old.
 
 
1 page97 viewsPOST REPLY
Esprit Model . Thunder Power RC . Mikado Modellhubschrauber

.
.
Align T-REX 600N 700N > elevator servo jumps up when switched into idle.
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, December 4 - 9:42 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie